• Length - 9' 8"
  • Width  -  22 3/4"
  • Nose  -  15 5/8"
  • Tail  -  15"
  • Thickness  -  3 1/4"
  • Nose Rocker  -  5"
  • Fin - Single, Thruster, Quad, Twinzer
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
9' 8" Trestle's Cruiser
We had us bigger guys in mind
when we added this shape to our
lineup.  3 1/4" thick and 22 3/4"
wide its super floaty but you don't
have to have gorilla arms to carry it.

Patterned after the 60's era boards
that ruled Trestles in San
Clemente CA  its been updated
with modern rails so it turns well
and hugs the wave. Single fin
works great or add a set of side
bites for a great modern riding
experience. Its best for riders up to
225 lbs. but heavier depending on
your experience level.  Brush up on
your cross stepping because its
nose riding time!
  • Surfboard Plans
  • Glassing and Fin Kits
  •  Accessories
  • Total Support
Order Your 63 Page PDF Instruction Manual and Full Size Plans Here
You will automatically receive the full size templates for the 9' 8" "Trestle's Cruiser" with
your order. You can order additional templates using the drop down window below.   
Site created by Jack Young.  All original art and photography (except as noted}.  Material on this site may not be duplicated without permission.
See more builders on our Facebook
page.  Send us pics of your build and
we'll show you off to the world too!
Got questions or comments?  Email me any time at
9' 8" Trestles Cruiser Instructions and Templates
Order here and pay with any
credit card through PayPal.  The
new versions aren't set up for
instant download yet so I'll send
them directly as soon as
possible.  If you are outside the
US it may be a few hours.
This is an eBook. The spar
templates are also sent as pdf
files via email. You simply print
the templates on a standard
printer and paste them together.  
Templates require between 6
and 11 sheets of paper
depending on the size.

If you order the 9' 8" Trestles Cruiser instructions and templates above you can add  templates for other boards for only $4.99 each.  
These templates are sold in addition to the book above and are not sold alone.
Additional Templates
Adam built one of the first Trestles Cruiser's way back in 2016 and
personalized his board with this custom logo.  
Fin made from scrap wood is nicer than just about any
one you can buy.  We show you how in the instructions.