| Order here and pay with any credit card through PayPal. The new versions aren't set up for instant download yet so I'll send them directly as soon as possible. If you are outside the US it may be a few hours. IMPORTANT This is an eBook. The spar templates are also sent as pdf files via email. You simply print the templates on a standard printer and paste them together. Templates require between 6 and 11 sheets of paper depending on the size. |
| BUILDING MATERIALS TO COMPLETE YOUR BOARD |
| Got questions or comments? Email me any time at jack@woodsurfboardplans.com |
| See more builders on our Facebook page. Send us pics of your build and we'll show you off to the world too! |
| Site created by Jack Young. All original art and photography (except as noted}. Material on this site may not be duplicated without permission. |
| Order Your 63 page PDF Instruction Manual and Full Size Plans Here You will automatically receive the full size templates for the 9'0" Longboard with your order. You can order additional templates using the drop down window below. |
This board is all about speed! This board was inspired by boards built by one of the best big
wave riders on the planet. He charged huge surf all over the world and he ruled the Banzai
Pipeline on the North Shore of Oahu Hawaii. These waves require skills, courage, and the
right equipment.
This board has soft 50/50 rails that get a little harder at the tail. The bottom is flat for speed
and the narrow tail reduces drag to a minimum.
We enhanced our board with subtle "ghost flames" airbrushed on the deck. If you like the look
and want to duplicate it on your own board we'll include the PDF file that will print a full size
picture of the flames. Tape up the pages and cut out your own stencil.
As with all our plans, the templates are full size for the ribs and spar and the full instructions
show every step of the build. We pride ourselves on our customer service so we are always
here to answer questions or give advice.
wave riders on the planet. He charged huge surf all over the world and he ruled the Banzai
Pipeline on the North Shore of Oahu Hawaii. These waves require skills, courage, and the
right equipment.
This board has soft 50/50 rails that get a little harder at the tail. The bottom is flat for speed
and the narrow tail reduces drag to a minimum.
We enhanced our board with subtle "ghost flames" airbrushed on the deck. If you like the look
and want to duplicate it on your own board we'll include the PDF file that will print a full size
picture of the flames. Tape up the pages and cut out your own stencil.
As with all our plans, the templates are full size for the ribs and spar and the full instructions
show every step of the build. We pride ourselves on our customer service so we are always
here to answer questions or give advice.
| 8' 6" BIG WAVE GUN |
- Length 8' 6"
- Width - 20 1/16"
- Nose - 12 1/8"
- Tail - 11 1/16 "
- Thickness - 3"
- Nose Rocker - 5 13/16"
- Tail Rocker - 3 3/8"
- Fin - single or Thruster
- Glassing - 4 oz, E glass
- Suggested resin - epoxy
- Glass schedule - 2 deck, 1 bottom
- Bottom profile - flat
- Construction - Fishbone frame
- Vent - Brass or plastic
| WoodSurfboardPlans.com |
- Surfboard Plans
- Glassing and Fin Kits
- Accessories
- Total Support
| The plans include a pdf file used to make a full size template for the flame graphics shown on this board! These optional flames are applied using an airbrush or other spray paint device. The flames are painted on and are not inlays or veneer. |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  |
SURFBOARD PLANS
FIBERGLASSING KITS
DECK TRACTION KITS
SUP PLANS
FIN KITS
