Boards up to 10'6"  This kit contains:
  • 11 yards of 4 oz. E glass cloth 30 inches wide.
  • 1 gallon of Resin Research Epoxy Resin
  •  2 quarts of hardener a
  •  4 oz bottle of Additive F
Need mixing cups, tape, sandpaper, brushes, etc.?  Order the optional Supplies Kit
Boards up to 7'6"  This kit contains:
  • 8 yards of 4 oz. E glass cloth 30 inches wide.
  • 2 quarts of Resin Research Epoxy Resin
  • 1 quart of hardener
  • 4 oz bottle of Additive F
Need mixing cups, tape, sandpaper, brushes, etc.?  Order the optional Supplies Kit
Epoxy resin can be applied to wood or foam boards.  Our E
glass cloth was  designed specifically  for the surfboard
industry.
GLASSING SUPPLIES KITS
We know that many builders already have some of these items so we separated them from the glassing
kits. Now you can buy just what you need.

This kit contains mixing cups, buckets, tack rags, and a whole box of nitrile gloves.  It also contains 10
brushes, stirring sticks, masking tape, pinline tape, and razor blades.  Its the perfect complement to any
of the glassing kits described above.

Add this kit to your glassing kit and you'll have everything you need to glass your board except solvent.
Our glassing kits contain enough glass fabric and resin to put two layers on the deck and
one on the bottom which is industry standard.

The Resin Research resin cures to an absolutely clear finish and creates a strong, durable,
UV resistant surface.  The E glass cloth wets out easily without having to press hard to
saturate the cloth.  This virtually eliminates snags and bubbles under the glass.   

Additive F is included on the finish (gloss) coat.  See the Frequently Asked Questions at
the bottom of this page for information on Additive F.
SHIPPING TO U.S. LOWER 48 STATES ONLY
Our epoxy glassing kits contain resin which is classified hazardous and cannot be shipped by air.  We can ship to
the U.S. lower 48 states only.  Canadian orders can be shipped by FedEx ground for additional cost.  Please call
for a price before ordering.  
$69.99
LOWEST PRICE ANYWHERE GUARANTEED!
Glassing kit for "The Mariner" SUP'
This kit contains:
  • Either 8 or 12 yards of 6 oz. E glass cloth 38
    inches wide.
  • 1 gallon of epoxy resin and 2 quarts of
    hardener
  • 25 yard roll of 2" wide, 6 oz. volan cloth tape
  • 4 oz. bottle Additive F (see Additive F
    description below)
$159.99
LOWEST PRICE ANYWHERE GUARANTEED!
$119.99
LOWEST PRICE ANYWHERE GUARANTEED!
WHAT IS ADDITIVE F?  -  Additive F is a flow agent/ surfacing agent/ wetting agent unique to the epoxy industry. It’s primary function is as a
surfacing/sanding agent which gives excellent flow characteristics by reducing surface tension. The same forces that act as a surfacing agent also
seal the surface raising barcol hardness. This improves the sanding characteristics of the composites allowing for finer finishing, something epoxy
eliminating blush chemically. Blush in epoxy coatings is the primary reason for recoating difficulties in the past and required physical removal
(usually sanding) before recoating could be attempted. Additive F eliminates this step.

WHAT KIND OF RESIN IS IN YOUR GLASSING KITS?  -  The Resin Research 2000CE is the industry standard for surfboard building epoxies.  The
2000CE is UV Stable and has has been optically brightened to make the board appear whiter.  Resin Research 2000CE can be used alone or with
Kwik Kick as a hot coating or fill coating resin. Both can be used with Additive F as a surfacing agent or sanding aid.  Fast hardener has a pot life of
25 min @ 77 F and a set time of 2.5 hours.

WHAT KIND OF GLASS FABRIC IS IN YOUR GLASSING KITS?  -  The regular surfboard kits contain 4oz glass, this is surfboard grade fiberglass,
meaning that it is quality inspected to be free of both cosmetic and structural defects.  The SUP kits contain 6oz glass for the added strength. Our
glass cloth is finished with a silane finish to provide a perfectly clear laminate and is compatible with polyester and epoxy resins.  Suggested uses
are for building surfboards, covering kayaks or canoes, or any application where you need a thin clear glass coating.  A typical surfboard layup is 2
layers of glass on the deck and 1 layer on the bottom although some builders use a single layer on the top and bottom to save finished weight.
STAND UP PADDLEBOARD GLASSING KITS
These glassing kits were custom designed to support the Mariner SUP.  The glass fabric is 38" wide to cover boards up to 32" wide.  Each kit
includes enough resin and cloth to apply two layers on the deck and one on the bottom.  There will still be enough material left over to glass on fins if
desired.  The Additive F can be added to the final gloss coat to provide even flow out and superior gloss.
E-GLASS SURFBOARD GLASSING KITS
FREQUENTLY ASKED QUESTIONS
Got questions or comments?  Email me any time at
jack@woodsurfboardplans.com
$179.99
LOWEST PRICE ANYWHERE GUARANTEED!
$199.99
LOWEST PRICE ANYWHERE GUARANTEED!
EPOXY IS THE BEST RESIN FOR A WOOD BOARD!
WoodSurfboardPlans.com
  • Surfboard Plans
  • Glassing and Fin Kits
  •  Accessories
  • Total Support