FIBERGLASSING KITS
DECK TRACTION KITS
SURFBOARD PLANS
Order here and pay with any
credit card through PayPal.  The
new versions aren't set up for
instant download yet so I'll send
them directly as soon as
possible.  If you are outside the
US it may be a few hours.
IMPORTANT
This is an eBook. The spar
templates are also sent as pdf
files via email. You simply print
the templates on a standard
printer and paste them
together.  Templates require
between 6 and 11 sheets of
paper depending on the size.
SUP  PLANS
FIN KITS
BUILDING MATERIALS TO COMPLETE YOUR BOARD
Got questions or comments?  Email me any time at
jack@woodsurfboardplans.com
CONTACT US
See more builders on our Facebook
page.  Send us pics of your build and
we'll show you off to the world too!
Site created by Jack Young.  All original art and photography (except as noted}.  Material on this site may not be duplicated without permission.
Order Your 63 page PDF Instruction Manual and Full Size Plans Here
You will automatically receive the full size templates for the 9'0" Longboard with your
order. You can order additional templates using the drop down window below.   
This board is all about speed!  This board was inspired by boards built by one of the best big
wave riders anywhere.  He charged huge surf all over the world and he ruled
the Banzai
Pipeline on the North Shore of Oahu Hawaii.  These waves require skills that most of us don't
have but this shape is so darn cool it would be a shame not to have one in your quiver

This board has soft 50/50 rails that get a little harder at the tail.  The bottom is flat for speed
and the narrow tail reduces drag to a minimum.   

We enhanced our board with subtle "ghost flames" airbrushed on the deck.  If you like the look
and want to duplicate it on your own board we'll include the PDF file that will print a full size
picture of the flames. Tape up the pages and cut out your own stencil.  

As with all our plans, the templates are full size for the ribs and spar and the full instructions
show every stem of the build. We pride ourselves on our customer service so we are always
here to answer questions or give advice.
9' 0" BIG WAVE GUN
  • Length 9' 0"
  • Width  -  18 9/16"
  • Nose  - 10 3/16 "
  • Tail  - 10 13/16 "
  • Thickness  -  2 7/16"
  • Nose Rocker  - 5 13/16"
  • Tail Rocker - 3 3/8"
  • Fin - single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
WoodSurfboardPlans.com
  • Surfboard Plans
  • Glassing and Fin Kits
  •  Accessories
  • Total Support
The plans include
a pdf file
used to
make a full size
template for the
flame
graphics
shown on this
board!
These optional flames are
applied using an airbrush or
other spray paint device. The
flames are painted on and are
not inlays or veneer.  
9' 0" Big Wave Gun Instructions and Templates
$14.99
If you order the 9' 0" Big Wave Gun  instructions and templates above you can add  templates for other boards for only $4.99 each.  
These templates are sold in addition to the book above and are not sold alone.
Additional Templates $4.99