• Length - 8' 6"
  • Width  -  22 1/4"
  • Nose  -  17"
  • Tail  -  14 7/8"
  • Thickness  -  2 3/4"
  • Nose Rocker  -  4 5/8"
  • Fin - Single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
8' 6" Pintail Funboard
This funboard is just that - FUN!  Its
kind of a longboard that wants to be
a  shortboard - and it loves a nice
medium-size swells.

The classic pintail has low drag for
speed but its easy to keep under
control.  A single fin works great but
you can install three, four, or even five
fins.  Its as agile as a short board but
you can get to the nose too. And the
modern rail profile seals the deal.

Its best for riders up to 190 lbs. but
heavier riders are OK depending on
your experience level.  
WoodSurfboardPlans.com
  • Surfboard Plans
  • Glassing and Fin Kits
  •  Accessories
  • Total Support
The full-size rib and spar
templates show the ribs
with rounded ends. These
rounded ends make
getting the correct rail
profile foolproof.

We've seen these boards
built as square tail, pin tail,
diamond tail, and swallow
tail.  Its your call - the
instructions show you how.
Order The PDF Instruction Manual & Full Size Plans Here
You will automatically receive the full size templates for the 8' 6" Pintail Fun Board with your order. You can order
additional templates using the drop down window below.   
Site created by Jack Young.  All original art and photography (except as noted}.  Material on this site may not be duplicated without permission.
See more builders on our Facebook
page.  Send us pics of your build and
we'll show you off to the world too!
Got questions or comments?  Email me any time at
jack@woodsurfboardplans.com
BUILDING MATERIALS TO COMPLETE YOUR BOARD
Full size templates printed out on
a regular ink jet or laser printer.
8' 6" Pintail Funboard Instructions and Templates
$14.99
Order here and pay with any
credit card through PayPal.  The
new versions aren't set up for
instant download yet so I'll send
them directly as soon as
possible.  If you are outside the
US it may be a few hours.
IMPORTANT
This is an eBook. The spar
templates are also sent as pdf
files via email. You simply print
the templates on a standard
printer and paste them together.  
Templates require between 6
and 11 sheets of paper
depending on the size.

If you order the 8' 6" Funboard instructions and templates above you can add  templates for other boards for only $4.99 each.  These
templates are sold in addition to the book above and are not sold alone.
Additional Templates
$4.99
SURFBOARD PLANS
FIBERGLASSING KITS
DECK TRACTION KITS
SUP  PLANS
FIN KITS
CONTACT US
This board was made with recycled redwood siding and
yard planter edging.  We added a paulownia pin line and
siding that we saved from the land fill and some was from
garden bender board (mow strip).  There's no stain on this
wood, this is the natural color after glassing.