• Length - 7' 10"
  • Width  -  22" 1/4"
  • Nose  -  16 5/8"
  • Tail  -  15 7/16"
  • Thickness  -  2 7/8"
  • Nose Rocker  -  4 7/8"
  • Tail Rocker - 2 9/16"
  • Fin - Single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
7'10" SPHERICAL
Back in 1969 the Vietnam war was going strong, man had landed on the moon, hippies and flower power
were the rage and surfboards were getting shorter. The Spherical Revolver was one of the best
transitional boards from that era.  It was short (by longboard standards) and abandoned nose riding for
speed and maneuverability.  Traditional longboard shapes were being replaced by smaller spherical
shape boards that let you charge a wave instead of cruising it.  It changed the way we surfed!

Fast forward to the present and we've come full circle.  Longboards are back and people are loving the
ride - but you just can't deny the fun of a shorter board.  The Spherical is all about fun and performance
and having one in your quiver will mean you are ready for any swell conditions.  

As with all our plans, the templates are full size for the ribs and spar and the full instructions show every
stem of the build. We pride ourselves on our customer service so we are always here to answer
questions or give advice.
WoodSurfboardPlans.com
  • Surfboard Plans
  • Glassing and Fin Kits
  •  Accessories
  • Total Support
Order Your 63 page PDF Instruction Manual and Full Size Plans Here
You will automatically receive the full size templates for the 7' 10" Spherical with your
order. You can order additional templates using the drop down window below.   
Site created by Jack Young.  All original art and photography (except as noted}.  Material on this site may not be duplicated without permission.
See more builders on our Facebook
page.  Send us pics of your build and
we'll show you off to the world too!
Got questions or comments?  Email me any time at
jack@woodsurfboardplans.com
BUILDING MATERIALS TO COMPLETE YOUR BOARD
Full size templates printed out on
a regular ink jet or laser printer.
7' 10" Spherical Board Instructions and Templates
$14.99
Order here and pay with any credit card through
PayPal.  The new versions aren't set up for
instant download yet so I'll send them directly
as soon as possible.  If you are outside the US
it may be a few hours.
IMPORTANT
This is an eBook. The spar templates are also
sent as pdf files via email. You simply print the
templates on a standard printer and paste them
together.  Templates require between 6 and 11
sheets of paper depending on the size.
When you order they ask for
your phone number.
We
won't call you unless you
email and ask us to!
 It's
required by the Yahoo store.
Don't worry, you'll never get
spam calls from us.

If you order the 7' 10" Spherical  instructions and templates above you can add  templates for other boards for only $4.99 each.  
These templates are sold in addition to the book above and are not sold alone.
Additional Templates
$4.99